diff options
Diffstat (limited to 'upb/pb')
-rw-r--r-- | upb/pb/decoder_x86.dasc | 170 |
1 files changed, 131 insertions, 39 deletions
diff --git a/upb/pb/decoder_x86.dasc b/upb/pb/decoder_x86.dasc index 20c20d7..b99e745 100644 --- a/upb/pb/decoder_x86.dasc +++ b/upb/pb/decoder_x86.dasc @@ -122,6 +122,7 @@ void upb_reg_jit_gdb(upb_decoder *d) { |.type FRAME, upb_dispatcher_frame, r13 |.type STRREF, upb_strref, r14 |.type DECODER, upb_decoder, r15 +|.type STDARRAY, upb_stdarray, r15 | |.macro callp, addr || if ((uintptr_t)addr < 0xffffffff) { @@ -206,7 +207,7 @@ void upb_reg_jit_gdb(upb_decoder *d) { | mov FRAME, rax |.endmacro | -|.macro popframe +|.macro popframe, m | sub FRAME, sizeof(upb_dispatcher_frame) | mov DECODER->dispatcher.top, FRAME | setmsgend m @@ -271,36 +272,13 @@ void upb_reg_jit_gdb(upb_decoder *d) { #include <stdlib.h> #include "upb/pb/varint.h" +#include "upb/msg.h" -// PTR should point to the beginning of the tag. -static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_tag, - upb_mhandlers *m, - upb_fhandlers *f, upb_fhandlers *next_f) { - int tag_size = upb_value_size(tag); - - // PC-label for the dispatch table. - // We check the wire type (which must be loaded in edx) because the - // table is keyed on field number, not type. - |=>f->jit_pclabel: - | cmp edx, (tag & 0x7) - | jne ->exit_jit // In the future: could be an unknown field or packed. - |=>f->jit_pclabel_notypecheck: - if (f->repeated) { - if (f->startseq) { - | mov ARG1_64, CLOSURE - | loadfval f - | callp f->startseq - } else { - | mov rdx, CLOSURE - } - | mov esi, FRAME->end_ofs - | pushframe f, rdx, esi, true - } - - |1: // Label for repeating this field. - +// Decodes the next val into ARG3, advances PTR. +static void upb_decoder_jit_decodefield(upb_decoder *d, upb_mhandlers *m, + uint8_t type, size_t tag_size) { // Decode the value into arg 3 for the callback. - switch (f->type) { + switch (type) { case UPB_TYPE(DOUBLE): case UPB_TYPE(FIXED64): case UPB_TYPE(SFIXED64): @@ -385,18 +363,60 @@ static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_ta default: abort(); } - // Commit our work by advancing ptr. - // (If in the future we wanted to support a UPB_SUSPEND_AGAIN that - // suspends the decoder and redelivers the value later, we would - // need to adjust this to happen perhaps after the callback ran). - | mov DECODER->ptr, PTR +} + +// DEPENDS: closure is in ARG1_64 +static void upb_decoder_jit_sethas(upb_decoder *d, upb_fielddef *f) { + if (f->hasbit < 0) return; + size_t byte = f->hasbit / 8; + uint8_t bit = 1 << (f->hasbit % 8); + | or byte [ARG1_64 + byte], bit +} - // Load closure and fval into arg registers. - | mov ARG1_64, CLOSURE +#if 0 +// These appear not to speed things up, but keeping around for +// further experimentation. +static void upb_decoder_jit_doappend(upb_decoder *d, uint8_t size, + upb_fhandlers *f) { + | mov eax, STDARRAY:ARG1_64->len + | cmp eax, STDARRAY:ARG1_64->size + | jne >2 + // If array is full, fall back to actual function. | loadfval f + | callp f->value + | jmp >3 + |2: + | mov rcx, STDARRAY:ARG1_64->ptr + | mov esi, eax + | add eax, 1 + + switch (size) { + case 8: + | mov [rcx + rsi * 8], ARG3_64 + break; + + case 4: + | mov [rcx + rsi * 4], ARG3_32 + break; + + case 1: + | mov [rcx + rsi * 4], ARG3_8 + break; + } + + | mov STDARRAY:ARG1_64->len, eax + |3: +} +#endif +static void upb_decoder_jit_callcb(upb_decoder *d, upb_fhandlers *f) { + upb_fielddef *fd = upb_value_getfielddef(f->fval); // Call callbacks. if (upb_issubmsgtype(f->type)) { + // Load closure and fval into arg registers. + | mov ARG1_64, CLOSURE + | loadfval f + // Call startsubmsg handler (if any). if (f->startsubmsg) { // upb_sflow_t startsubmsg(void *closure, upb_value fval) @@ -424,7 +444,7 @@ static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_ta } |=>f->jit_submsg_done_pclabel: - | popframe + | popframe upb_fhandlers_getmsg(f) // Call endsubmsg handler (if any). if (f->endsubmsg) { @@ -434,9 +454,81 @@ static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_ta | callp f->endsubmsg } } else { - | callp f->value + | mov ARG1_64, CLOSURE + // Test for callbacks we can specialize. + // Can't switch() on function pointers. + if (f->value == &upb_stdmsg_setint64 || + f->value == &upb_stdmsg_setuint64 || + f->value == &upb_stdmsg_setptr || + f->value == &upb_stdmsg_setdouble) { + upb_decoder_jit_sethas(d, fd); + | mov [ARG1_64 + fd->offset], ARG3_64 + } else if (f->value == &upb_stdmsg_setint32 || + f->value == &upb_stdmsg_setuint32 || + f->value == &upb_stdmsg_setfloat) { + upb_decoder_jit_sethas(d, fd); + | mov [ARG1_64 + fd->offset], ARG3_32 + } else if (f->value == &upb_stdmsg_setbool) { + upb_decoder_jit_sethas(d, fd); + | mov [ARG1_64 + fd->offset], ARG3_8 +#if 0 + // These appear not to speed things up, but keeping around for + // further experimentation. + } else if (f->value == &upb_stdmsg_setint64_r || + f->value == &upb_stdmsg_setuint64_r || + f->value == &upb_stdmsg_setptr_r || + f->value == &upb_stdmsg_setdouble_r) { + upb_decoder_jit_doappend(d, 8, f); + } else if (f->value == &upb_stdmsg_setint32_r || + f->value == &upb_stdmsg_setuint32_r || + f->value == &upb_stdmsg_setfloat_r) { + upb_decoder_jit_doappend(d, 4, f); + } else if (f->value == &upb_stdmsg_setbool_r) { + upb_decoder_jit_doappend(d, 1, f); +#endif + } else { + // Load closure and fval into arg registers. + | loadfval f + | callp f->value + } } // TODO: Handle UPB_SKIPSUBMSG, UPB_BREAK +} + +// PTR should point to the beginning of the tag. +static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_tag, + upb_mhandlers *m, + upb_fhandlers *f, upb_fhandlers *next_f) { + // PC-label for the dispatch table. + // We check the wire type (which must be loaded in edx) because the + // table is keyed on field number, not type. + |=>f->jit_pclabel: + | cmp edx, (tag & 0x7) + | jne ->exit_jit // In the future: could be an unknown field or packed. + |=>f->jit_pclabel_notypecheck: + if (f->repeated) { + if (f->startseq) { + | mov ARG1_64, CLOSURE + | loadfval f + | callp f->startseq + } else { + | mov rdx, CLOSURE + } + | mov esi, FRAME->end_ofs + | pushframe f, rdx, esi, true + } + + |1: // Label for repeating this field. + + upb_decoder_jit_decodefield(d, m, f->type, upb_value_size(tag)); + + // Commit our work by advancing ptr. + // (If in the future we wanted to support a UPB_SUSPEND_AGAIN that + // suspends the decoder and redelivers the value later, we would + // need to adjust this to happen perhaps after the callback ran). + | mov DECODER->ptr, PTR + + upb_decoder_jit_callcb(d, f); // Epilogue: load next tag, check for repeated field. | check_eob m @@ -444,7 +536,7 @@ static void upb_decoder_jit_field(upb_decoder *d, uint32_t tag, uint32_t next_ta if (f->repeated) { | checktag tag | je <1 - | popframe + | popframe m if (f->endseq) { | mov ARG1_64, CLOSURE | loadfval f |